angelo surmelis dating - Windows xp connecting to wireless network validating identity

It can find the network fine, but when I try to connect, I don't get the password prompt -- it moves straight to "validating identity," scans, and then says "Windows was not able to find a certificate to log you on to the wireless network Foo." The maddening thing is that the card was working fine a week ago, in the same box, using the same OS.

windows xp connecting to wireless network validating identity-34

There's no WPA2 on the card, just WPA and WPA-PSK: WPA-PSK was the only setting that would let me enter a network key.

I had TKIP and AES as options there, but cipher type is AES on the router, so I chose that.

I'm currently doing a spare-parts build to put a media computer in the living room, and having a devil of a time getting my Rosewill RNX-6300 wireless card to connect to my network.

I'm trying to set it up using Windows as opposed to the proprietary Rosewill software -- the Rosewill software is a little over my head.

I am, as you can tell, far from proficient at this. It's 2.4GHz, WPA2-Personal/AES, and I'm not sure about regular or wide, but in "Mode" it says it takes 802.11n, 802.11g, and 802.11b. This is probably not the enterprsie setup which you have at home.

Is there a popup with "Windows was unable to find a certificate to log you on to the network shepherd"? Asking because certificates are used for WAP2 enterprise and not for WPA2 personal. Is there a tick at "Enable IEEE 802.1x authentication for this network"? (Basically that uses a certificate to contact a central authentication server whereas you use a pre shared key).

This means that you will have to disconnect (unplug) the cellular modem (aircard) from the computer and close the cellular connection manager tool provided by your cellular carrier or, disconnect from any LAN (wired Ethernet) or Wi-Fi (wireless) connections before you will be able to connect your computer to the router either by Ethernet cable or Wi-Fi.

By default, the wifi SSID will always be the model of the Cradlepoint router separated by a (-) and then the last 3 of the routers MAC address.

your card does not support wpa2 if i am reading your dropdown list correctly on your card.

You can try stepping up encryption to wpa/tkip, wpa-psk/aes, wpa-psk/tkip however the settings must be the same on both your router and your card.

That said you cannot have wpa set on your card and have wpa-psk set on router.

Tags: , ,